 |
Submersible Mixer pump
| Model | Poles | Output | Capacity | Jet-Ring | Dimension(mm) | ||
|---|---|---|---|---|---|---|---|
| P | Kw | Hp | M⊃3;/min | A | B | ||
| KMR-4-4D | 4 | 0.40 | 1/2 | 1.8 | Optional | 480 | 395 |
| KMR-7-4D | 4 | 0.75 | 1 | 3.2 | Optional | 510 | 425 |
| KMR-15-4D | 4 | 1.52 | 2 | 4.5 | Standard | 632 | 567 |
| KMR-22-4D | 4 | 2.23 | 3 | 6.8 | Standard | 652 | 587 |
| No. | PART | MATERIAL | No. | PART | MATERIAL |
| 1 | Gable | STOW | 25 | Mechanical Seal | SIC/SIC |
| 15 | Motor Cover | SUS 316 | 26 | Oil Seal | VITON |
| 16 | Seal Seat | SUS 316 | 29 | Sliding Seat | SUS 304 |
| 17 | End Bell | FC 200 | 52 | Bearing | |
| 18 | Bracket | SUS 316 | 53 | Over-current Protector | |
| 19 | Inlet Cover | SUS 304 | 54 | Shaft | SUS 316 |
| 20 | Jet Ring | SUS 304 | 57 | Motor Hosuing | SUS 316 |
| 21 | Impeller | SUS 316 |
Submersible Mixer pump
| Model | Poles | Output | Capacity | Jet-Ring | Dimension(mm) | ||
|---|---|---|---|---|---|---|---|
| P | Kw | Hp | M⊃3;/min | A | B | ||
| KMR-4-4D | 4 | 0.40 | 1/2 | 1.8 | Optional | 480 | 395 |
| KMR-7-4D | 4 | 0.75 | 1 | 3.2 | Optional | 510 | 425 |
| KMR-15-4D | 4 | 1.52 | 2 | 4.5 | Standard | 632 | 567 |
| KMR-22-4D | 4 | 2.23 | 3 | 6.8 | Standard | 652 | 587 |
| No. | PART | MATERIAL | No. | PART | MATERIAL |
| 1 | Gable | STOW | 25 | Mechanical Seal | SIC/SIC |
| 15 | Motor Cover | SUS 316 | 26 | Oil Seal | VITON |
| 16 | Seal Seat | SUS 316 | 29 | Sliding Seat | SUS 304 |
| 17 | End Bell | FC 200 | 52 | Bearing | |
| 18 | Bracket | SUS 316 | 53 | Over-current Protector | |
| 19 | Inlet Cover | SUS 304 | 54 | Shaft | SUS 316 |
| 20 | Jet Ring | SUS 304 | 57 | Motor Hosuing | SUS 316 |
| 21 | Impeller | SUS 316 |
